Cruisemaniac.com

I was out yesterday to meet a couple of friends and as is customary, we were clicking photos with our cameras AND not to forget mention, our mobiles.  At this point, my friend Hrish (@dhempe, for all those who would not identify with the name ) raised an interesting point!

Thus spake Dhempe and here I quote:

Many of us have cameras on our phones, and we click photos! But, its a very messy job to put them in a place where others can see it and also to share with friends. The mobile phone is a blackhole for its own content!

And that statement is filled with such profound truth!

Many of us, or if I may, a whole LOT of us have phones that are quite capable of generating content (Images, videos, voice recordings, etc) and we definitely do generate enough content to fill storehouses with our happy / romantic / funny / cheesey/ whatever memories for lifetimes together. Heck, this is what the mobile phone revolution is coming around to do…

For us geeks, connectivity, socializing and sharing is as basic and habitual an act as is having food.  We feel the necessity to share and connect and as a result, find and utilize services to enable this! Photos go on twitpic / flickr, Videos go on Qik / youtube, Shouts / screams go on blogs / facebook / twitter… we have no end to destinations!

But, a lot of content does not make it online / publicly (atleast within friends) available.  Infact, most of this content doesnt even make it outside of the mobile devices!  And, mind you, the memory on the mobile is limited.  And the main use of this memory, again mind you, is Ringtones and MP3 music!  The photos and videos captured thus take a backseat and much of this content is to true sadness, deleted to make way for more MP3 and ringtones! And hence the reference to a black hole in the title of my post!

• In reasoning as to why people don’t share their photos or videos, the first answer that pops up is: “They dont have a computer!” And this is a very valid point across the lengtrh and breadth of this nation.  Access to a computer is not everyone’s daily possibility.  But with cost of mobiles going down, they do have access to multimedia devices!
• Another reason, a lot of people do not have GPRS active on their devices. Reason, it doesnt make sense…  No, GPRS doesnt yet make sense for a guy working as a driver.  A mobile phone with a camera does. Why? 1. He can afford it. 2. He can flaunt it! Simple!
• The third reason I can think of is the software problems that is associated with sharing content.  Getting your Nokia phone (Cited Nokia because its the most common / prevalent brand in INDIA) connected to the PC with PC suite isnt really an easy job.  Sometimes, you need to make use of imaginary numbers like eleventeen and the likes!!!  For the blindfolded usability and seamlessness nokia gives its phones, the software it bundles with it is not quite the works!!!
• The fourth and final reason I can think of: There is only so much of sharing you can do via bluetooth with your friends and there’s only so much of showing it to friends that you can do…. Believe me, give it a try, you’ll know!

So, four reasons why content doesnt get out of the mobile!

What if a user could as and when he / she could and wanted, move and materialize the media he / she created to make place for more memories to be stored? This, my friends, is a very interesting challenge and hence an interesting prospect for a service!

We are over 400 million mobile users in India alone.  I am really in a fix in figuring out a solution to get this content out of their mobiles and shared across with their friends and with the world!

The way out:

• One solution I can think of is the Kiosk model.  A shop / vending machine where people could go and get their photos printed / and mailed for cheap using Bluetooth to transfer their content. Or better, transfer the photo, punch in the address where it needs to be delivered and presto, the photo + address travels via IP to the centre closest to the destination and gets printed and posted from there!
• Another amazing service I can think of with the kiosk model is one where the videos captured using the mobile can be transferred to CD’s. Come to talk of it, a CD costs you 8 Rs.

These are two solutions off the top of my mind…

The whole idea that I’m trying to propagate here is to take the complexity of the software / sharing service bit of the scenario away from the hands of the user.  This effectively reduces complexity for the layman with the multimedia mobile and effectively encourages him to share the content he / she creates on the mobile with friends and hence further encourage him to generate more content and so on and so forth!

I’d really love to hear more from you all on how the black hole scenario can be averted! Sharing services are many and aplenty!

The success of a service is, in our Indian scenario, not just in holding existing users to itself, but in getting those new users from outside the regular spectrum to come in, take a look, get enthusiastic and get enabled!

Would love to have comments and discussions on this topic!

Chao!

You know, of the toughest things in having a blog, it is not about maintaining it, its not about keeping it hacker-proof, it is about generating content for it.

And for me, that is THE problem I am having!!! Writing a post here… With a perennial writers-block in my head, writing ONE blog post is becoming a herculean task for me.  Over the last few days I’ve been introspecting on why I’m unable to write…

• Its probably because I’m interested in doling out high-quality content only. Duh!
• Its because I’m stigmatized against writing something for the love of writing but instead concentrate more on the outcry of what anyone would say when they see the content…
• Its because I’m scared to admit that I might not know sh*t about what I write here…

And you know what??? F*&k that!!! Here goes, one “junky” post to get my gears rolling…

Do stay back and comment… and keep visiting here… Will / do hope to have more content soon…

Chao…

Developers working on Symbian code have always had problems when it came to testing their apps.  The process is quite a bit cumbersome:

1. Build your code – Cross compile it for ARMV5 / ARM-GCCE Release
2. Make your sis installer (unsigned)
3. Upload the SIS to symbiansigned.com using the Symbian Online Signed program
4. Click on the confirmation link in your email
5. Wait for your app to be signed by symbian and recieve the email
6. Download the app
7. Install and test (mostly only to realise that you have made the mistake of not installing theCActiveScheduler::Add(this) in your ConstructL.

The process works… nevertheless, its very very very cumbersome and timeconsuming.  And the debug that you are left with is plain text-statements that you write to a log file and dump it onto the filesystem.  While this method may be good enough for some small apps using the in-built emulator, testing GSM activity and live testing of the application is not quite possible or comfortable there.

There is however, another really good way to debug your app and step thru code and read symbian variable values right from the comfort zone of your PC. Say hello to ODD or On-Device-Debug.

On-Device Debugging has been a prominent feature of Symbian IDE’s right since the Metrowerks CodeWarrior days! Yes, its been there… but back then, prior to Symbian OS 9.0 / S60 3.0, it was used more for JTAG based debugging.

Now, with Carbide, virtually any app can be set to debug mode and tested with ODD. And in this post, I will show you how:

Requirements:

1. Carbide 2.0 – The eclipse based IDE is at v2.0. Its free and is absolutely amazing to use. Next best thing since notepad for writing symbian code!!!
2. S60v3/S60v5 device – For the purpose of this article and impending demo, I am using a Nokia 6210 navigator but any S60v3/S60v5 device should work. (Ideally this is the case but I do not have non-Nokia S60V3/S60v5 devices to test and confirm it…
3. USB cable / Bluetooth – The code you want to test runs on the device… and you need something to transfer data between the PC and the device… So BT / USB data cable it will be.

SETUP:

And the Steps for getting your ODD setup in place:

First, install Nokia PC suite on your PC.  This dude is important as PC suite contains the basic connectivity drivers for your device.  Without that, your phone wouldnt be able to connect to the PC.

Next up, Fire up carbide. The On-Device debug mode is needed to be setup from the help menu. So… head over to Help -> On-Device Connections.You will be presented with a menu like so:Select between Bluetooth and USB for connecting to your device. The other 2 connectivity methods Serial and TRK2.x are, well, not covered in this tutorial. But just a heads up, Serial connection is when you have a serial cable connecting your device to a physical COM port (so 1990’s) and the TRK2.x is for the TRK debugger which uses the elusive and exhorbitantly costly impossible-to-buy-for-a-indi-dev JTAG cable. So, there… We use either Bluetooth or USB 2.0 cable options to connect with our device. In my case here, its USB.

TRK:

Click on next and head over directly to the install remote agents tab.  This will let us install the TRK client onto the devices. This is a sis file that is tailored for every single S60 version since 3.0.  Lets talk a little bit about the TRK client here.  This app is basically what helps you pause your code and step through when the code is executing on the device.Select the Application TRK 3.x.x Installer. and click on the install button and fire up the PC Suite installer, proceed to install it.  I would prefer you install the TRK app on the phone memory rather than the mass memory or memory card.

We do not need the Carbide Profiler 2.0 installers. But, Just for FYI sakes, they are apps used to profile processor performance and load.  I seriously do not know what purpose it exactly serves. If you do know, do help me by dropping in a comment

Connection:

Once you are done with the installation, fire up the TRK application on the device. Select Options -> Settings and select USB / Bluetooth as your connection method is.  In my case here, its USB.

Once you are connected, the TRK app will show the Status as connected like so…

Here, connected means that the cable is connected to the device.  It DOES NOT mean that you are connected to carbide in any way.  Why it is so… I have no idea!

Now, on carbide, switch to the Set Connection Settings tab in the connection properties window.  In the Connection Settings dialog box, click on the drop-down and you should currently see your device assigned to one of the com ports.Select the com port your device is detected in, the TRK version installed on your device and click on initiate testing. A connection successful message would mean that your TRK on the device is detected and you are good to go.  If it fails, its mostly the COM port being selected wrong.  I really have no idea how to fix this, but yeah, a trial and error run with some com ports should work always!

Hit Finish, And we’re good to go do some code-debugging on carbide!!!

To take a look at the remote connections, Hit Window –> Show View –> Other. Expand the Carbide.C++ list, select Remote Connections and click on OK. You will be presented with a list of remote connections you currently have.Debugging:

To start with debugging, open your Symbian C++ project and in build options, select Phone debug (GCCE). Hit the build.Once the build is fine, hit debug. Since we do not have a debug configuration for GCCE Phone debug, carbide will ask us to create a new configuration like so:Select the Application TRK Launch Configuration, and click on next. The remote connection we created earlier is listed and selected automatically. Proceed to the next step where it asks for the SIS file to be installed. Carbide has already filled up the necessary information. We just need to add a few things.

Now, click on the Modify Sis builder settings for build configuration link just below the Sis File dialog box.  This will open a new dialog box where the only things we need to modify are as below:

• Enable the partial Upgrade checkbox. This will help quickstart the debug as the whole sis file is not re-created and signed. Only the delta is sent across to be debugged again…
• Select the configuration and click on Edit. You will notice that the Self Sign sis file option is selected already.

Good, now wind up and head out… Once you hit finish, carbide starts up the debugger and switches to the debug perspective. The application will be packaged, signed, transferred to the device, installed on the C/ E drive that you choose, and started up.  Provided you have already set a breakpoint, the code will execute till that point and you have control to step through then on.So, there you go… On Device Debugging for S60 apps on Carbide.  Have fun coding…

Chao!

• What if Creativity was not our forte?
• What if only speed is?
• What if all we could do was improvise and not create?
• What if the reason behind out failures was waning of the genes over generations?
• What if we as a race did not innovate fast enough?
• What if we are looking at the wrong problem altogether

Would we survive? As individuals? As communities? As a Nation?

These are some questions I have on why we dont get to  see a lot of “creation of technology” in India.  By creating a wave, I dont mean Tata Nano.  No, that is not technical innovation… The world has Been there, done that! What we achieved with the nano was new business sense… I find it personally impressive.  My question really is: what is stopping us from driving innovation at the snap of our fingers? 1.1 billion people and we still can’t find enough people to roll the wheels???

These questions have been burning in my head for quite sometime and I would love to have a discussion on this… Either here on my blog or on twitter. I’m all eyes and ears

Chao…

This is a story of how I got my domain cruisemaniac.com:

Long long ago, quite some time ago, before the whole hosted blogging thingy, I was having one of the thousands of wordpress.com hosted blogs. http://cruisemaniac.wordpress.com was the URL.  Then, BCB2 happened… and all those wonderful people suggested that I could also move to a domain hosted blog and that would look cooler considering that my pseudo-name “Cruisemaniac” was kinda popular at the time (or so they said )

And so, I went about finding who the good webhosts were and how much I would have to shell out for the domain + space and all that… I cornered it down to bluehost for my hosting and when I started the domain booking procedure, i popped in the domain name and poof… it was not available. I had the horror of horrors in finding out that the term “cruisemaniac” and hence, the website cruisemaniac.com was owned by a porn-star… Nope, that would not be me… but then yeah, it was owned by a d*&k-headed porn star (d*&k-headed… so to speak!) So I went out, bought the domain “thecruisemaniac.com“, setup my blog ranted here, and totally forgot about the domain name… Over a period of time, due to strong and unrelenting perseverance, the term cruisemaniac has come to be identified as my identity and not that of the pr0n guy!

So, winding forward to a few weeks back, when I was fooling around on the internet, I remembered the domain name and checked to see what had happened to cruisemaniac.com and to my surprise, it gave me a 404!  Checking the whois info told me that it was not renewed and was going to get released into the freepool in a weeks time.  After discussions with our honourable web-expert Mr. Prashanth, I set a backorder on godaddy for the domain.  Close to a week after that, on a cloudy, cool, monday morning (scenic descriptions eh ), Godaddy confirmed the domain for me! Which is jhakaas!!! With a tweet to w00t for victory, the domain became mine and I have now smoothly migrated the blog from thecruisemaniac.com to cruisemaniac.com and this is where you are currently.

And I hence, proclaim, I AM Cruisemaniac!

So yeah, there goes, the story… A lived-happily-ever-after ending to it

Now that the happy story is done with, there are a few things left to be done: I have always wanted a landing page as I dont like the root of the domain to be where my blog is hosted. The landing page is still under construction and I hope to have it completed by this weekend.  I also neeed a nicer theme for hte blog… Not that I dont like the current one, but I need a more elegant one. If any of you have pointers to some good looking themes, do drop in a comment and I would really appreciate that.

And most importantly, now that the entire website has been moved, if there are any broken links, missing files, do let me know…

Till the next post, chao!

P.S.: I will not take any criticism on the pr0n star sh*&. I have had enough of that already!

P.P.S.: I am Cruisemaniac! I AM ‘THE’ CRUISEMANIAC!